Combatting Cracks: Troubleshooting Common Skirting Board Installation Issues

Skirting boards, also known as baseboards, are important for a room’s aesthetic appeal. They cover the gap between the wall and the floor and enhance the overall look of a room. One crucial aspect of skirting board installation is accurate measurement. Accurate measurement can help avoid mistakes and save money and time down the line. This article aims to provide a guide on mastering the measurement process for skirting board installation.
1. Measuring the wall lengths
The first step in measuring for skirting board installation is to determine the length of each wall. Measure the length of each wall where skirting boards will be installed. This will give you a general idea of how much skirting board will be required for the whole room. Add the length of each wall together to get a total measurement.
2. Measuring around corners
Once you have the wall lengths, place the skirting board at a 45-degree angle in the corner. Place the end of the board on the corner, and measure where the other end ends on the wall. Once you have this measurement, mark the board accordingly, and cut the board down to size with a saw. This is called a miter joint. Be sure to measure the other side of the corner and cut the corresponding board down to size. It is important to make accurate cuts; otherwise, the skirting boards will not fit and gaps will arise.
3. Measuring doorways and windows
When measuring around doorways and windows, measure the length of the door frame horizontally so that when the skirting board is installed, it fits neatly around the frame. Measure the length of the window frame in the same way. Once you have these measurements, cut the skirting board accordingly.
4. Measuring height
The height of the skirting board can vary, but it is essential to measure accurately to avoid wasting material. Measure the height of the wall, then decide on the height of the skirting board you want. Keep in mind that a higher skirting board can make your room look bigger, while a lower skirting board can make it cozier. Once you have the desired height, measure from the floor to the top of the skirting board and cut down the skirting board to size.
5. Finishing touches
After the installation is complete, inspect the skirting boards for gaps or areas that may need caulking. Fill gaps with caulking and ensure that the skirting boards have been securely fastened to the walls.
Mastering the measurement process for skirting board installation can save you time and money and add value to your room’s overall aesthetic appeal. It is important to measure accurately to avoid any mistakes and ensure a smooth installation process. Take your time with the measurements and don’t be afraid to ask for help if necessary. In the end, the result will be worth the effort put into the measurement process. Install your skirting boards with confidence and enjoy the transformed look of your room.